ENZOSOFT

ENZOSOFT

Enzosoft is an enzymatic process for finishing of cellulosic materials such as cotton, linen, viscose, ramie and their blends with synthetic fibres.

ENZOSOFT

Biopolishing is an enzymatic process for finishing of cellulosic materials such as cotton, linen, viscose, ramie and their blends with synthetic fibres. It is a process that removes fuzz and eliminates pilling in cellulosic garments. The enzyme performs a controlled hydrolysis of the cellulosic fibres in order to modify the fabric surface. This keeps the garments looking new even after repeated washes. It effects are permanent, without involving chemical coating of the fibre.

Application:

ENZOSOFT is well suited for Biopolishing of cotton and cotton blends trousers, Shirts (Garment dyed and Fabric dyed) and other garments made of cellulosic materials.ENZOSOFT also works best on denims as a bio fading enzyme if used in lower proportions like 0.3-0.7% OWG.

Enzyme Dosage : 0.7% -1% O.W.G (on weight of garment)

Treatment Time : 45-90 minutes.

pH : 4.5-5.5

Optimum pH : 4.8

Occurrence : Liquid

Nature : Acid.

Temperature : 48 – 55C.

The Enzyme treatment should be terminated by a thorough rinse and detergent wash – off followed by treatment with Amino Silicone /Cationic softener which will give Unmatched Softness.

Storage: Generally, at a storage temperature of 25C,ENZOSOFT maintains the declared activity. A temp above 30C should be avoided.

Advantage of enzyme washing:

Soft handle and attractive clean appearance is obtained without severe damage to the surface of yarn.
Inexpensive, low-grade fabric quality can be finished to a top quality product by the removal of hairiness fluff and pills, etc.
Simple process handling and minimum effluent problem.
Better feel to touch and increased gloss or luster.
Prevent tendency of pilling after relatively short period of wear.
Can be applied on cellulose and its blend.
Due to mild condition of treatment process is less corrosive.

Fancy Colour – flenced surface can be obtained without or a partial use of stone. More reproducible effect can be obtained.

It allows more loading of the garment into machines.
Environmental friendly treatment. Less damage to seam edges.
Wear and tar of equipment is minimum due to lesser use or absence of stones. Use of softener can be avoided or minimized.
Easy handling of floor and severs as messy sludge of stones does not interfere. Due to absence of stone, labour intensive operation of stone removal is not required.
Homogenous abrasion of the garments. Puckering effect can be obtained. Problem of Pumice Powder contamination on garment is not there.

Disclaimer:

The above information is correct to the best of our knowledge; however the recommendations are without any engagement on our part as they depend upon the conditions of usage, which vary from plant to plant.