OLINOL-D-30 Is a very economical scouring , stain remover,  and dyeing auxiliary for polyester fabrics.

FEATURES:

• ·        Environmental Friendly, Oil Removing and Scouring Agent

• ·        Highly efficient scouring and multifunctional dyeing agent.

• ·        A multi functional product which provides bleaching and brightening effects.

• ·        Along with cleaning it also makes fabric soft.

• ·        Get 150% to 200% production in same expenses. 

• ·        It removes texturing and weaving oil and size

• ·        Reduces quantity of caustic & hydro required for processing synthetic fabrics.

• ·        Acts as a dye career and leveling agent

• ·        Compared with traditional process, less damage to fabric and enhanced economic efficacy.

• ·        Effective cleaning, less water and energy consumption

• ·        No need to add emulsifier or N.I.D as it is mixed in the formulation.

                                           PROPERTIES

• ·        COMPOSITION : Blend of non-ionic surfactants and specialty chemicals

• ·        APPEARANCE : colorless to pale yellow liquid

• ·        IONIC NATURE : Non-ionic

• ·        SOLUBILTY : Easily miscible with water

• ·        PH  :6

• ·        STABILITY : permanent          

                                APPLICATIONS OF : OLINOL-D-30

 PROCESS FOR SCOURING 100% POLYESTER CLOTH PROCESS: Take 100 kgs of polyester cloth. At 60 °Cadd 1.5 KG of OLINOL-D-30 & add acetic acid to maintain PH-4 & then add required amount of color. Raise the temperature up to 120 °C to 130 °C in jet dyeing. Holding time is 30 minutes per batch.

ADVANTAGE: OLINOL-D-30 saves water, power, fuel & labour cost.

(2)    Weight Reduction process:

(A)               Use 1.5 KG.OLINOL-D-30, with caustic soda in 100 kgs cloth

Advantage: it gives better swelling, wetting and gives even weight reduction.

(b) After weight reduction as per above standard process repeat the application (1)

ADVANTAGE: It gives even weight reduction, removes spinning oil, size & other impurities. Cloth gets excellent brightness, extra bouncing effect & 10 to 15 % enhanced color depth.

(3) Drum process:

Addition of  1.5 KG. Of OLINOL-D-30, in 100 kgs, Cloth in usual process.

Advantage: It saves time. Process is possible even at lower temperature. It gives better swelling, extra bounce, relaxation of yarn and better disability.

(1)              TOP DYED (YARN DYED) FABRIC PROCESS :

Take 100 kgs. Of polyester viscose cloth in jet dyeing machine. Add 2-2.5 kg OLINOL-D-30 and & add acetic acid to maintain PH-4 and required amount of WHITE-R & RANIPAL. Raise the temperature up to 80 °Cto 90 °C in jet scouring. Holding time required is only 30 minutes per batch. In Jigger dyeing raise the temperature upto 80 °C to 90 °C .

(2)Double dyeing process: Take 100 kgs of polyester viscose clothe. At 60 °Cadd 1.5 KG of OLINOL-D-30 with disperse & reactive colour. Now add acetic acid to maintain PH-4 and 10 kgs common salt. Raise the temperature upto 130 °C. Hold for 10 minutes. Add 2 kgs soda ash & again hold for 10 minutes. Now drain the bath and give plain wash with acetic acid.