RINOMER-CLA

RINOMER-CLA

An ideal cross-linking agent for shock cure finish process.

                                            RINOMER - CLA

                                              (Cross-linking Agent)

RINOMER - CLA is an ideal cross-linking agent for shockcure finish process. It is based on DMDHEU with built in catalyst and fibre protecting system and it gives an effective crease recovery performance.

GENERAL CHARACTERISTICS :

APPEARANCE: Pale yellow clear liquid.

COMPATIBILITY: Good with usual resin finishing chemicals. They should be stable at pH 4. Pretrials necessary with new products.

pH Value: 3.5 - 4

SOLUBILITY: Readily soluble in water.

CONSTITUTION: Based on Dimethylol Dihydroxy ethylene used with built in Catalyst.

SALIENT FEATURES :

Non-yellowing tendency.

Imparts stiffness to synthetic fibres.

No adverse effects on cellulosics.

No tendency to thermomigration.

No significant effect on light fastness or shade change.

APPLICATION :

Synthetic fabric with resilent stiff finish : 10 - 15g/l. Pad for 80% pickup and cure at 180°C for 45 seconds.

Polyester / cellulosic blends

Suiting: 50 - 60g/l

Shirting: 50 - 60g/l

Pad to 60% pickup and cure at 180°C for 45 seconds.

100% cellulosics wash-n-wear finish

1) Pad to 70% pickup dry at 120°C and cure at 150°C for 1min. or

2) Pad and shock cure at 180°C for 45 seconds or 190°C for 30 seconds without drying.

PACKING: 50Kgs. net in HDPE Container.